International Journal of Materials Technology and Innovation

Author Index

A

Abd allatif, mohamed Hazem Effect of Heat Input on Weldability of Low Nickel High Manganese Stainless Steel. [Volume 3, Issue 2, 2023, Pages 19-29]
Abdel-Aal, E. A. Synthesis of Agglomerated Hydroxyapatite Nanospheres with Performance as Anti-Viral Material [Volume 1, Issue 1, 2021, Pages 1-17]
Abdel-Aal, E. A. Synthesis of High Hardness Hydroxyapatite Particles using Surfactant Assisted Hydrothermal Method [Volume 2, Issue 1, 2022, Pages 35-50]
Abdel-Aal, El-Sayed Ali Extraction of Lithium from Naturally Occurring Li -Bearing Minerals [Volume 4, Issue 1, 2024, Pages 1-13]
Abdel-Aal, El-Sayed Ali Membrane-Based Processes for Water Treatment and Desalination: A Comprehensive Review [(Articles in Press)]
Abdel-Aleem, Hamed Failure Analysis of Welded Steam Boiler Flange [Volume 3, Issue 2, 2023, Pages 30-36]
Abdel-Ghafar, H. M. Synthesis of Agglomerated Hydroxyapatite Nanospheres with Performance as Anti-Viral Material [Volume 1, Issue 1, 2021, Pages 1-17]
Abdel-Ghafar, H. M. Synthesis of High Hardness Hydroxyapatite Particles using Surfactant Assisted Hydrothermal Method [Volume 2, Issue 1, 2022, Pages 35-50]
Abdel-Ghafar, Hamdy Extraction of Lithium from Naturally Occurring Li -Bearing Minerals [Volume 4, Issue 1, 2024, Pages 1-13]
Abdel-Ghafar, Hamdy M. Membrane-Based Processes for Water Treatment and Desalination: A Comprehensive Review [(Articles in Press)]
Abdel Halim, Khaled Saad Future of Ironmaking: Review [Volume 2, Issue 2, 2022, Pages 74-82]
Abdel-Khalek, M A Removal of Crystal Violet and Acid Red 1 Dyes from Wastewater by Mechanically Activated Talc [Volume 3, Issue 3, 2023, Pages 18-32]
Abd Ellatif, H. Morphology and Mechanical Properties of Al- TiC Nanocomposite Processed via Ball Milling Technique [Volume 1, Issue 1, 2021, Pages 18-29]
Abd Elnaser, Gamal Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants. [Volume 4, Issue 2, 2024, Pages 9-13]
Abdelwahed, Marwan Effect of Wire Arc Additive Manufacturing Process Parameters on Bead Geometry and Porosity Formation of 5356 Aluminum alloy [Volume 4, Issue 2, 2024, Pages 39-45]
Abd-Elwahed, A. Investigation of the Effectuation of Graphene Nanosheets (GNS) Addition on the Mechanical Properties and Microstructure of S390 HSS Using Powder Metallurgy Method [Volume 1, Issue 1, 2021, Pages 52-57]
Abdo, Shaban Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants. [Volume 4, Issue 2, 2024, Pages 9-13]
Abdolkader, T. M. A Review of Perovskite Solar Cells [Volume 1, Issue 2, 2021, Pages 48-66]
Abdolkader, T. Excitonic Solar Cells: A Review [Volume 1, Issue 2, 2021, Pages 81-92]
Abdolkader, Tarek Mohammad A review of ion-sensitive field effect transistor (ISFET) based biosensors. [Volume 3, Issue 3, 2023, Pages 69-84]
Abdolkader, Tarek Mohammad Tunnel Field Effect Transistor (TFET): A Review [Volume 4, Issue 1, 2024, Pages 14-31]
Abdou, Sabrine mohamed A Brief Review of Silver Phosphate Nanocomposites as Photocatalysts [Volume 4, Issue 1, 2024, Pages 32-41]
Abdou, Shaban Influence of the phases' stabilization on corrosion behavior of novel Ti-10Mo-xZr alloys for Bio-implants applications. [(Articles in Press)]
Abdullatef, Ossama Evaluation of the Conditions of a Calligraphy Manuscript and an Old Historical and Archaeological Legitimate Argument from the 18th Century [Volume 3, Issue 3, 2023, Pages 60-68]
Abouelela, K. Influence of microstructure features on wear behavior of Ti-6Al4V alloy [Volume 2, Issue 1, 2022, Pages 60-66]
Abu Taleb, M. Hybrid bioadsorbents for heavy metal decontamination from wastewater: A review [Volume 2, Issue 1, 2022, Pages 5-19]
Adachi, Tadaharu An overview on penetration mechanism and optimization techniques of steel sandwich structure under ballistic testing [Volume 2, Issue 2, 2022, Pages 55-73]
Afifi, Sofia Mohamed Removal of Crystal Violet and Acid Red 1 Dyes from Wastewater by Mechanically Activated Talc [Volume 3, Issue 3, 2023, Pages 18-32]
Ahmed, I. S. A Review of Perovskite Solar Cells [Volume 1, Issue 2, 2021, Pages 48-66]
Ahmed, Y. M. Z. Sialon-based Composites for Solar Receivers: An overview [Volume 1, Issue 1, 2021, Pages 77-88]
Ahmed, Y. Porous sulfur/carbon composite role in solving the limitations of Li-S batteries: A Case Study [Volume 1, Issue 2, 2021, Pages 34-39]
Alhussein, Walaa Ahmad Effect of Nano-Aluminium Oxide Percentage of A-TIG on Mechanical Properties of Welded Joint of 7075 Aluminum Alloy [Volume 3, Issue 2, 2023, Pages 74-79]
Ali, Fayza A. 2D Transition Metal Dichalcogenides for Energy Applications [Volume 2, Issue 2, 2022, Pages 1-12]
Ali, Hayam A. Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants. [Volume 4, Issue 2, 2024, Pages 9-13]
Ali, Hossameldien Limitations and advancements of Sodium Silicate inorganic sand binders; A review [Volume 2, Issue 2, 2022, Pages 47-54]
Alkady, O. A. Studying the Effect of Process Controlling Agent on the Microstructure, Electrical and Thermal Conductivities of Copper /Graphene Composite Prepared by PM [Volume 1, Issue 1, 2021, Pages 89-95]
Alkorbi, A. S. Mesoporous Silicon with Nanostructured Au-Ti Front-side Electrical Contact as Efficient Capacitive Sensor Toward Different Alcohols in Liquid Phase [Volume 1, Issue 2, 2021, Pages 14-23]
Allam, N. The synergetic effect of cobalt content on enhancing the photoelectrochemical hydrogen production performance of in-situ-doped TiO2 photocatalysts [Volume 2, Issue 1, 2022, Pages 20-28]
Alsayed, Abd.Elatif Corrosion of Steel Pipes Utilized for Crude Oil Production and Transportation in Oil and Gas Industry [Volume 3, Issue 3, 2023, Pages 101-111]
ALSSAYH, MUAMMER ALI A study on the Microstructure of Heat Affected Zone of Austempered Ductile Iron Alloyed with 1.6% Cu and 1.6% Ni [Volume 3, Issue 1, 2023, Pages 70-74]
Aly, Hayam Influence of the phases' stabilization on corrosion behavior of novel Ti-10Mo-xZr alloys for Bio-implants applications. [(Articles in Press)]
Amuda, Akeem Mohammed Microstructure and Mechanical properties of Dissimilar Welds of Duplex and API Steel for Offshore Applications [Volume 3, Issue 2, 2023, Pages 80-91]
Amuda, Hakeem Evaluation of Corrosion Resistance of GTAW API 5L X60 Steel / 2205 Duplex Stainless Steel Dissimilar Welds Produced with Different Heat Inputs. [Volume 3, Issue 3, 2023, Pages 33-42]
Attia, Helmi Wire Electrical Discharge Machining Process: Challenges and Future Prospects [Volume 2, Issue 2, 2022, Pages 31-37]
Attia, M. A.A. Synthesis of impermeable cellular glass foam from soda lime glass waste using SiC foaming agent [Volume 2, Issue 1, 2022, Pages 1-4]
Awad, Ahmed Developing and Characterization of Aluminum 6063 Reinforced with Electric Arc Furnace Slag [Volume 4, Issue 2, 2024, Pages 60-68]
Awad, Ahmed Influence of the phases' stabilization on corrosion behavior of novel Ti-10Mo-xZr alloys for Bio-implants applications. [(Articles in Press)]
Awad, Ahmed H. Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants. [Volume 4, Issue 2, 2024, Pages 9-13]
Awad, Mohamed Effect of Wire Arc Additive Manufacturing Process Parameters on Bead Geometry and Porosity Formation of 5356 Aluminum alloy [Volume 4, Issue 2, 2024, Pages 39-45]

B

Baehr, Ruediger Microstructure Control of Al-Ce Alloys:‎ A Review [Volume 2, Issue 2, 2022, Pages 83-87]
Baioumy, H. Geology of Rare Metals in Egypt- A review [Volume 1, Issue 1, 2021, Pages 58-76]
Barakat, Mohmed Hybrid bioadsorbents for heavy metal decontamination from wastewater: A review [Volume 2, Issue 1, 2022, Pages 5-19]
Brown, Lawrence Co-Processing of Hybrid Laser Arc Welding (HLAW) & Submerged Arc Welding (SAW) for Enhancing ‎Productivity in Thick High Strength Steel Joints [Volume 3, Issue 2, 2023, Pages 1-9]

D

Daoud, Atef Hybrid Composite Foams Based on Pb Alloys for Lightweight Batteries [Volume 2, Issue 2, 2022, Pages 38-46]
Dawood, R. Synthesis of Agglomerated Hydroxyapatite Nanospheres with Performance as Anti-Viral Material [Volume 1, Issue 1, 2021, Pages 1-17]
Dobl, Sayed Corrosion of Steel Pipes Utilized for Crude Oil Production and Transportation in Oil and Gas Industry [Volume 3, Issue 3, 2023, Pages 101-111]

E

Ebo-Quansah, Ignatius An overview on penetration mechanism and optimization techniques of steel sandwich structure under ballistic testing [Volume 2, Issue 2, 2022, Pages 55-73]
EI-Batahy, Abdel-Monem Failure Analysis of a Fuel Supply Tube of an Aircraft Engine [Volume 4, Issue 2, 2024, Pages 1-8]
Eid, Ahmed Amer Effect of Heat Input on Weldability of Low Nickel High Manganese Stainless Steel. [Volume 3, Issue 2, 2023, Pages 19-29]
Eissa, M. Effect of Substituting Ni by N on Corrosion Behavior of Stainless Steel [Volume 2, Issue 1, 2022, Pages 51-59]
Ekeh, Darlington Microstructure and Mechanical properties of Dissimilar Welds of Duplex and API Steel for Offshore Applications [Volume 3, Issue 2, 2023, Pages 80-91]
Ekeh, Darlington Evaluation of Corrosion Resistance of GTAW API 5L X60 Steel / 2205 Duplex Stainless Steel Dissimilar Welds Produced with Different Heat Inputs. [Volume 3, Issue 3, 2023, Pages 33-42]
Elamir, A. Porous sulfur/carbon composite role in solving the limitations of Li-S batteries: A Case Study [Volume 1, Issue 2, 2021, Pages 34-39]
El-Amir, A. A. M. Sialon-based Composites for Solar Receivers: An overview [Volume 1, Issue 1, 2021, Pages 77-88]
El-Amir, A. A. M. Synthesis of impermeable cellular glass foam from soda lime glass waste using SiC foaming agent [Volume 2, Issue 1, 2022, Pages 1-4]
El-batanony, I. G. Studying the Effect of Process Controlling Agent on the Microstructure, Electrical and Thermal Conductivities of Copper /Graphene Composite Prepared by PM [Volume 1, Issue 1, 2021, Pages 89-95]
El-Dars, Farida Removal of Crystal Violet and Acid Red 1 Dyes from Wastewater by Mechanically Activated Talc [Volume 3, Issue 3, 2023, Pages 18-32]
El-Demsisy, H. A. Perovskite-Based Tandem/Multi-junction Solar Cells [Volume 1, Issue 2, 2021, Pages 67-80]
El Faramawy, H. Effect of Substituting Ni by N on Corrosion Behavior of Stainless Steel [Volume 2, Issue 1, 2022, Pages 51-59]
El Fawkhry, M. K. The Effect of Bad Heat Treatment Technology on Failure Mode of Armor Steel Sheet under EN1522 Ballistic Test [Volume 1, Issue 1, 2021, Pages 30-44]
El-Hadad, S. High Entropy Alloys: The Materials of Future [Volume 2, Issue 1, 2022, Pages 67-84]
El-Hadad, Shimaa Wire Electrical Discharge Machining Process: Challenges and Future Prospects [Volume 2, Issue 2, 2022, Pages 31-37]
El-Hadad, Shimaa Microstructure Control of Al-Ce Alloys:‎ A Review [Volume 2, Issue 2, 2022, Pages 83-87]
El-Hadad, Shimaa Effect of Copper Addition on Microstructure and Mechanical Properties of Ductile Cast Iron [Volume 4, Issue 1, 2024, Pages 75-79]
El-Hout, Soliman A Brief Review of Silver Phosphate Nanocomposites as Photocatalysts [Volume 4, Issue 1, 2024, Pages 32-41]
Eljaafari, Wafa Yousef Grain Refinement of AZ91 Mg-Cast Alloy (Review Paper) [Volume 3, Issue 1, 2023, Pages 90-95]
El kady, O. A. Investigation of the Effectuation of Graphene Nanosheets (GNS) Addition on the Mechanical Properties and Microstructure of S390 HSS Using Powder Metallurgy Method [Volume 1, Issue 1, 2021, Pages 52-57]
El-kady, O. A. Effect of space holder percent on the porosity biocompatibility of nano Ti foam by PM technique [Volume 1, Issue 1, 2021, Pages 45-51]
Elkady, O. A. Morphology and Mechanical Properties of Al- TiC Nanocomposite Processed via Ball Milling Technique [Volume 1, Issue 1, 2021, Pages 18-29]
Elkady, Omayma Recent Advances In Production of Automotive Industry’s Spare Parts By Powder Metallurgy [Volume 3, Issue 3, 2023, Pages 1-17]
El-Koussy, Mohamed Raafat Effect of GTAW Welding Current on the Quality of 304L Austenitic Stainless Steel Using ER316L [Volume 3, Issue 2, 2023, Pages 10-18]
El-Maddah, A. A. Sialon-based Composites for Solar Receivers: An overview [Volume 1, Issue 1, 2021, Pages 77-88]
El-Maddah, A. Porous sulfur/carbon composite role in solving the limitations of Li-S batteries: A Case Study [Volume 1, Issue 2, 2021, Pages 34-39]
El-Mahallawi, Iman E Effect of GTAW Welding Current on the Quality of 304L Austenitic Stainless Steel Using ER316L [Volume 3, Issue 2, 2023, Pages 10-18]
El-Mahallawy, Nahed Effect of Wire Arc Additive Manufacturing Process Parameters on Bead Geometry and Porosity Formation of 5356 Aluminum alloy [Volume 4, Issue 2, 2024, Pages 39-45]
Elmenshawy, Heba Evaluation of the Conditions of a Calligraphy Manuscript and an Old Historical and Archaeological Legitimate Argument from the 18th Century [Volume 3, Issue 3, 2023, Pages 60-68]
Elnady, Marwa Eid Hybrid Composite Foams Based on Pb Alloys for Lightweight Batteries [Volume 2, Issue 2, 2022, Pages 38-46]
EL-Nikhaily, A. Morphology and Mechanical Properties of Al- TiC Nanocomposite Processed via Ball Milling Technique [Volume 1, Issue 1, 2021, Pages 18-29]
Elsarag, Tharwat Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants. [Volume 4, Issue 2, 2024, Pages 9-13]
Elsarag, Tharwat Influence of the phases' stabilization on corrosion behavior of novel Ti-10Mo-xZr alloys for Bio-implants applications. [(Articles in Press)]
Elsayed, E The Role of Electrochemistry and Electrochemical Technology in Environmental Protection, a review [Volume 3, Issue 2, 2023, Pages 37-63]
Elsayed, Elsayed Mostafa Preparation and characterization of cobalt ferrite CoFe2O4 thin films from alcoholic medium and their application restrictions [Volume 3, Issue 3, 2023, Pages 85-100]
El-Sayed, D. Synthesis of High Hardness Hydroxyapatite Particles using Surfactant Assisted Hydrothermal Method [Volume 2, Issue 1, 2022, Pages 35-50]
El-Sayed, Dena Extraction of Lithium from Naturally Occurring Li -Bearing Minerals [Volume 4, Issue 1, 2024, Pages 1-13]
Elseman, Ahmed Mourtada 2D Transition Metal Dichalcogenides for Energy Applications [Volume 2, Issue 2, 2022, Pages 1-12]
Elshaer, R. Influence of microstructure features on wear behavior of Ti-6Al4V alloy [Volume 2, Issue 1, 2022, Pages 60-66]
El-Shazly, A. The synergetic effect of cobalt content on enhancing the photoelectrochemical hydrogen production performance of in-situ-doped TiO2 photocatalysts [Volume 2, Issue 1, 2022, Pages 20-28]
El-Sheikh, Said M A Brief Review of Silver Phosphate Nanocomposites as Photocatalysts [Volume 4, Issue 1, 2024, Pages 32-41]
El Shenawy, E. The synergetic effect of cobalt content on enhancing the photoelectrochemical hydrogen production performance of in-situ-doped TiO2 photocatalysts [Volume 2, Issue 1, 2022, Pages 20-28]
El-Shorbagy, Rania Corrosion Failures in Oil and Gas Fields: Review and Case Studies [Volume 4, Issue 2, 2024, Pages 30-38]
Elwakad, M. T. Effect of space holder percent on the porosity biocompatibility of nano Ti foam by PM technique [Volume 1, Issue 1, 2021, Pages 45-51]
Elwakeil, A. S. Interaction Mechanism of U(VI) with Redox Active Covalent Organic Framework: EXAFS Spectroscopy and XPS analysis [Volume 2, Issue 1, 2022, Pages 29-34]
Ewais, E. M. Synthesis of Agglomerated Hydroxyapatite Nanospheres with Performance as Anti-Viral Material [Volume 1, Issue 1, 2021, Pages 1-17]
Ewais, E. M. M. Sialon-based Composites for Solar Receivers: An overview [Volume 1, Issue 1, 2021, Pages 77-88]
Ewais, E. Porous sulfur/carbon composite role in solving the limitations of Li-S batteries: A Case Study [Volume 1, Issue 2, 2021, Pages 34-39]
Ewais, E. Synthesis of impermeable cellular glass foam from soda lime glass waste using SiC foaming agent [Volume 2, Issue 1, 2022, Pages 1-4]
Ewais, E. M. Synthesis of High Hardness Hydroxyapatite Particles using Surfactant Assisted Hydrothermal Method [Volume 2, Issue 1, 2022, Pages 35-50]

F

Faisal, M. Mesoporous Silicon with Nanostructured Au-Ti Front-side Electrical Contact as Efficient Capacitive Sensor Toward Different Alcohols in Liquid Phase [Volume 1, Issue 2, 2021, Pages 14-23]
Farhat, Mohsen Removal of Crystal Violet and Acid Red 1 Dyes from Wastewater by Mechanically Activated Talc [Volume 3, Issue 3, 2023, Pages 18-32]
Fathy, A. M. The Effect of Bad Heat Treatment Technology on Failure Mode of Armor Steel Sheet under EN1522 Ballistic Test [Volume 1, Issue 1, 2021, Pages 30-44]
Fawzy, Jumana Corrosion Failures in Oil and Gas Fields: Review and Case Studies [Volume 4, Issue 2, 2024, Pages 30-38]
Fend, T. Synthesis of impermeable cellular glass foam from soda lime glass waste using SiC foaming agent [Volume 2, Issue 1, 2022, Pages 1-4]
Feteha, M. Alkali Etched Nanoporous Silicon Graphene Composite as Sodium Ion Battery Anode [Volume 1, Issue 2, 2021, Pages 24-33]

G

Gamal Abd ELnaser, Gamal Influence of the phases' stabilization on corrosion behavior of novel Ti-10Mo-xZr alloys for Bio-implants applications. [(Articles in Press)]
Gepreel, Mohamed Abdel-Hady Limitations and advancements of Sodium Silicate inorganic sand binders; A review [Volume 2, Issue 2, 2022, Pages 47-54]
Ghali, S. Development of Molybdenum Nickel Steel to Improve Mechanical Properties at High Temperature [Volume 1, Issue 2, 2021, Pages 40-47]
Ghali, S. Effect of Substituting Ni by N on Corrosion Behavior of Stainless Steel [Volume 2, Issue 1, 2022, Pages 51-59]
Ghanem, W. Effect of Substituting Ni by N on Corrosion Behavior of Stainless Steel [Volume 2, Issue 1, 2022, Pages 51-59]
Ghayad, Ibrahim Corrosion of Steel Pipes Utilized for Crude Oil Production and Transportation in Oil and Gas Industry [Volume 3, Issue 3, 2023, Pages 101-111]
Gomaa, Mohamed Gamal Membrane-Based Processes for Water Treatment and Desalination: A Comprehensive Review [(Articles in Press)]

H

Hafez, Khalid Failure Analysis of a Fuel Supply Tube of an Aircraft Engine [Volume 4, Issue 2, 2024, Pages 1-8]
Hakim, M. Porous sulfur/carbon composite role in solving the limitations of Li-S batteries: A Case Study [Volume 1, Issue 2, 2021, Pages 34-39]
Halawani, R. Hybrid bioadsorbents for heavy metal decontamination from wastewater: A review [Volume 2, Issue 1, 2022, Pages 5-19]
Halfa, Hossam Effect of Heat Input on Weldability of Low Nickel High Manganese Stainless Steel. [Volume 3, Issue 2, 2023, Pages 19-29]
Hamed, A. T Studying the Effect of Process Controlling Agent on the Microstructure, Electrical and Thermal Conductivities of Copper /Graphene Composite Prepared by PM [Volume 1, Issue 1, 2021, Pages 89-95]
Hamid, F. S. Morphology and Mechanical Properties of Al- TiC Nanocomposite Processed via Ball Milling Technique [Volume 1, Issue 1, 2021, Pages 18-29]
H. AMRA, Rana Developing and Characterization of Aluminum 6063 Reinforced with Electric Arc Furnace Slag [Volume 4, Issue 2, 2024, Pages 60-68]
Hamza, M. The synergetic effect of cobalt content on enhancing the photoelectrochemical hydrogen production performance of in-situ-doped TiO2 photocatalysts [Volume 2, Issue 1, 2022, Pages 20-28]
Harraz, F. Mesoporous Silicon with Nanostructured Au-Ti Front-side Electrical Contact as Efficient Capacitive Sensor Toward Different Alcohols in Liquid Phase [Volume 1, Issue 2, 2021, Pages 14-23]
Hassan, Ahmed Effect of GTAW Welding Current on the Quality of 304L Austenitic Stainless Steel Using ER316L [Volume 3, Issue 2, 2023, Pages 10-18]
Hassan, El-Sayed Rare Earths in Egypt: Occurrence, Characterization and Physical Separation, A Review [Volume 3, Issue 3, 2023, Pages 43-59]
Hassan, Eman Adel A review of ion-sensitive field effect transistor (ISFET) based biosensors. [Volume 3, Issue 3, 2023, Pages 69-84]
Hassan, Mohsen An overview on penetration mechanism and optimization techniques of steel sandwich structure under ballistic testing [Volume 2, Issue 2, 2022, Pages 55-73]
Hassanin, Ahmed An overview on penetration mechanism and optimization techniques of steel sandwich structure under ballistic testing [Volume 2, Issue 2, 2022, Pages 55-73]
Hegazy, A. The synergetic effect of cobalt content on enhancing the photoelectrochemical hydrogen production performance of in-situ-doped TiO2 photocatalysts [Volume 2, Issue 1, 2022, Pages 20-28]
Hegazy, M. Investigation of the Effectuation of Graphene Nanosheets (GNS) Addition on the Mechanical Properties and Microstructure of S390 HSS Using Powder Metallurgy Method [Volume 1, Issue 1, 2021, Pages 52-57]
Helal, Mohamed Evaluation of the Conditions of a Calligraphy Manuscript and an Old Historical and Archaeological Legitimate Argument from the 18th Century [Volume 3, Issue 3, 2023, Pages 60-68]
Hussein, Alaa Mahmoud Effects of Zr Addition on Magnetic Susceptibility of Novel Biocompatible Ti-10Mo-(x)Zr Alloys for Biomedical Implants. [Volume 4, Issue 2, 2024, Pages 9-13]
Hussein, Alaa Mahmoud Influence of the phases' stabilization on corrosion behavior of novel Ti-10Mo-xZr alloys for Bio-implants applications. [(Articles in Press)]
Hussein, Mostafa Rashad Preparation and characterization of cobalt ferrite CoFe2O4 thin films from alcoholic medium and their application restrictions [Volume 3, Issue 3, 2023, Pages 85-100]

I

Ibrahim, Ibrahim ahmed Preparation and characterization of cobalt ferrite CoFe2O4 thin films from alcoholic medium and their application restrictions [Volume 3, Issue 3, 2023, Pages 85-100]
Ibrahim, Mervat An overview on Thin Wall Cast Iron Castings and its Applications in Automotive Industry [Volume 3, Issue 1, 2023, Pages 57-69]
Ibrahim, Mervat Effect of Copper Addition on Microstructure and Mechanical Properties of Ductile Cast Iron [Volume 4, Issue 1, 2024, Pages 75-79]

K

Kadi, W. M. Promoted photocatalytic hydrogen evolution over core-shell-structured Co3O4/TiO2 under visible light [Volume 1, Issue 2, 2021, Pages 1-13]
Kandeel, W. A. Synthesis of Agglomerated Hydroxyapatite Nanospheres with Performance as Anti-Viral Material [Volume 1, Issue 1, 2021, Pages 1-17]
Kandil, Abdel-Hakim T. Membrane-Based Processes for Water Treatment and Desalination: A Comprehensive Review [(Articles in Press)]
Kashyout, A. E. Alkali Etched Nanoporous Silicon Graphene Composite as Sodium Ion Battery Anode [Volume 1, Issue 2, 2021, Pages 24-33]
Khalifa, Waleed Corrosion Failures in Oil and Gas Fields: Review and Case Studies [Volume 4, Issue 2, 2024, Pages 30-38]
Khalifa, Waleed Improving the Performance of Domestic Pin Punches Using Failure Analysis Investigation Techniques [Volume 4, Issue 2, 2024, Pages 46-59]
Khater, M. A. Effect of space holder percent on the porosity biocompatibility of nano Ti foam by PM technique [Volume 1, Issue 1, 2021, Pages 45-51]
Khodir, Saad Ahmed Failure Analysis of Welded Steam Boiler Flange [Volume 3, Issue 2, 2023, Pages 30-36]
Kumar, Rajeev Hybrid bioadsorbents for heavy metal decontamination from wastewater: A review [Volume 2, Issue 1, 2022, Pages 5-19]

L

Lamie, M. Effect of Substituting Ni by N on Corrosion Behavior of Stainless Steel [Volume 2, Issue 1, 2022, Pages 51-59]
Lawal, Taiwo Microstructure and Mechanical properties of Dissimilar Welds of Duplex and API Steel for Offshore Applications [Volume 3, Issue 2, 2023, Pages 80-91]

M

Mahdy, A. A. Studying the Effect of Process Controlling Agent on the Microstructure, Electrical and Thermal Conductivities of Copper /Graphene Composite Prepared by PM [Volume 1, Issue 1, 2021, Pages 89-95]
Mahmoud, Dina Improving the Performance of Domestic Pin Punches Using Failure Analysis Investigation Techniques [Volume 4, Issue 2, 2024, Pages 46-59]
M. ELSABBAGH, Ahmed Developing and Characterization of Aluminum 6063 Reinforced with Electric Arc Furnace Slag [Volume 4, Issue 2, 2024, Pages 60-68]
M. M. Ewais, Prof. Emad Preface [Volume 1, Issue 1, 2021]
Mohamed, R. M. Promoted photocatalytic hydrogen evolution over core-shell-structured Co3O4/TiO2 under visible light [Volume 1, Issue 2, 2021, Pages 1-13]
Mosa, E. S. Studying the Effect of Process Controlling Agent on the Microstructure, Electrical and Thermal Conductivities of Copper /Graphene Composite Prepared by PM [Volume 1, Issue 1, 2021, Pages 89-95]
Mourad, Mohamed Effect of Copper Addition on Microstructure and Mechanical Properties of Ductile Cast Iron [Volume 4, Issue 1, 2024, Pages 75-79]
Moussa, Mohamed Eissa Microstructure Control of Al-Ce Alloys:‎ A Review [Volume 2, Issue 2, 2022, Pages 83-87]
Moussa, Mohamed Eissa Recent Trends in Casting Technology of Functionally Graded Metallic Alloys [Volume 3, Issue 1, 2023, Pages 75-89]

N

Nabil, M. Alkali Etched Nanoporous Silicon Graphene Composite as Sodium Ion Battery Anode [Volume 1, Issue 2, 2021, Pages 24-33]
Neamtallah, A. Hybrid bioadsorbents for heavy metal decontamination from wastewater: A review [Volume 2, Issue 1, 2022, Pages 5-19]
Newishy, Mohamed Salah Failure Analysis of Welded Steam Boiler Flange [Volume 3, Issue 2, 2023, Pages 30-36]
Nofal, Adel Microstructure Control of Al-Ce Alloys:‎ A Review [Volume 2, Issue 2, 2022, Pages 83-87]

O

Oladoye, Atinuke Evaluation of Corrosion Resistance of GTAW API 5L X60 Steel / 2205 Duplex Stainless Steel Dissimilar Welds Produced with Different Heat Inputs. [Volume 3, Issue 3, 2023, Pages 33-42]
Omar, Fatma Ahmed Tunnel Field Effect Transistor (TFET): A Review [Volume 4, Issue 1, 2024, Pages 14-31]
Osman, B. A. A Review of Perovskite Solar Cells [Volume 1, Issue 2, 2021, Pages 48-66]
OSOBA, Lawrence Microstructure and Mechanical properties of Dissimilar Welds of Duplex and API Steel for Offshore Applications [Volume 3, Issue 2, 2023, Pages 80-91]
OSOBA, Lawrence Evaluation of Corrosion Resistance of GTAW API 5L X60 Steel / 2205 Duplex Stainless Steel Dissimilar Welds Produced with Different Heat Inputs. [Volume 3, Issue 3, 2023, Pages 33-42]
Othman, Mostafa Microstructure Control of Al-Ce Alloys:‎ A Review [Volume 2, Issue 2, 2022, Pages 83-87]

R

Radowan, Abdelatef Abbas Ahmed Analytical Techniques for Determining Pesticide Residues in Food: A Comprehensive Review [Volume 4, Issue 1, 2024, Pages 42-74]
Ramadan, Noha Effect of Wire Arc Additive Manufacturing Process Parameters on Bead Geometry and Porosity Formation of 5356 Aluminum alloy [Volume 4, Issue 2, 2024, Pages 39-45]
Rashad, Mohamed M 2D Transition Metal Dichalcogenides for Energy Applications [Volume 2, Issue 2, 2022, Pages 1-12]
Rashed, M. Mesoporous Silicon with Nanostructured Au-Ti Front-side Electrical Contact as Efficient Capacitive Sensor Toward Different Alcohols in Liquid Phase [Volume 1, Issue 2, 2021, Pages 14-23]
Rasly, Mahmoud 2D Transition Metal Dichalcogenides for Energy Applications [Volume 2, Issue 2, 2022, Pages 1-12]
Riedel, Eric Microstructure Control of Al-Ce Alloys:‎ A Review [Volume 2, Issue 2, 2022, Pages 83-87]

S

Sabry, Ibrahim ARTIFICIAL NEURAL NETWORK PREDICTION OF CORROSION RATE IN FRICTION STIR-WELDED ALUMINUM FLANGE [(Articles in Press)]
Sadek, Alber Co-Processing of Hybrid Laser Arc Welding (HLAW) & Submerged Arc Welding (SAW) for Enhancing ‎Productivity in Thick High Strength Steel Joints [Volume 3, Issue 2, 2023, Pages 1-9]
Salah, Bahaa A. Membrane-Based Processes for Water Treatment and Desalination: A Comprehensive Review [(Articles in Press)]
Salem, M. S. Excitonic Solar Cells: A Review [Volume 1, Issue 2, 2021, Pages 81-92]
Salman, Salah Corrosion of Steel Pipes Utilized for Crude Oil Production and Transportation in Oil and Gas Industry [Volume 3, Issue 3, 2023, Pages 101-111]
Samy, M. Excitonic Solar Cells: A Review [Volume 1, Issue 2, 2021, Pages 81-92]
Saxena, Ashok High-Pressure Hydrogen Storage Vessel Designs for Hydrogen Embrittlement [Volume 4, Issue 2, 2024, Pages 14-29]
Selmy, W. S. Perovskite-Based Tandem/Multi-junction Solar Cells [Volume 1, Issue 2, 2021, Pages 67-80]
SHALABY, ESSAM Hybrid Composite Foams Based on Pb Alloys for Lightweight Batteries [Volume 2, Issue 2, 2022, Pages 38-46]
Shams, Eman Effect of Wire Arc Additive Manufacturing Process Parameters on Bead Geometry and Porosity Formation of 5356 Aluminum alloy [Volume 4, Issue 2, 2024, Pages 39-45]
Shehata, Mostafa Wire Electrical Discharge Machining Process: Challenges and Future Prospects [Volume 2, Issue 2, 2022, Pages 31-37]
Shemis, M. A. Synthesis of Agglomerated Hydroxyapatite Nanospheres with Performance as Anti-Viral Material [Volume 1, Issue 1, 2021, Pages 1-17]
Shenouda, Atef Youssef Hybrid Composite Foams Based on Pb Alloys for Lightweight Batteries [Volume 2, Issue 2, 2022, Pages 38-46]
Sobhy, Ahmed Recent Trends in Mineral Processing Based on Density and Particle Size – A review [Volume 2, Issue 2, 2022, Pages 13-30]
Soliman, M. Alkali Etched Nanoporous Silicon Graphene Composite as Sodium Ion Battery Anode [Volume 1, Issue 2, 2021, Pages 24-33]
Soliman, Mohamed Evaluation of the Conditions of a Calligraphy Manuscript and an Old Historical and Archaeological Legitimate Argument from the 18th Century [Volume 3, Issue 3, 2023, Pages 60-68]

T

Taha, Mohamed Developing and Characterization of Aluminum 6063 Reinforced with Electric Arc Furnace Slag [Volume 4, Issue 2, 2024, Pages 60-68]
Taha, Mohamed Effect of Wire Arc Additive Manufacturing Process Parameters on Bead Geometry and Porosity Formation of 5356 Aluminum alloy [Volume 4, Issue 2, 2024, Pages 39-45]
Taher, Malak Hybrid Composite Foams Based on Pb Alloys for Lightweight Batteries [Volume 2, Issue 2, 2022, Pages 38-46]
Turky, Ali Omar 2D Transition Metal Dichalcogenides for Energy Applications [Volume 2, Issue 2, 2022, Pages 1-12]

W

Wahba, Mohamed Failure Analysis of a Fuel Supply Tube of an Aircraft Engine [Volume 4, Issue 2, 2024, Pages 1-8]
Wazeer, W. Alkali Etched Nanoporous Silicon Graphene Composite as Sodium Ion Battery Anode [Volume 1, Issue 2, 2021, Pages 24-33]

Y

Yassin, Khaled New Challenges in Upgrading of Difficult-to-Treat Ores, review [Volume 4, Issue 1, 2024, Pages 80-96]
Yehia, H. M. Investigation of the Effectuation of Graphene Nanosheets (GNS) Addition on the Mechanical Properties and Microstructure of S390 HSS Using Powder Metallurgy Method [Volume 1, Issue 1, 2021, Pages 52-57]

Z

Zidan, H. M. Investigation of the Effectuation of Graphene Nanosheets (GNS) Addition on the Mechanical Properties and Microstructure of S390 HSS Using Powder Metallurgy Method [Volume 1, Issue 1, 2021, Pages 52-57]